• Tính nhạy khí H₂S của cảm biến nano oxit coban hình thái cầu từ template cacbon cầuTính nhạy khí H₂S của cảm biến nano oxit coban hình thái cầu từ template cacbon cầu

    Cacbon cầu được tổng hợp bằng phương ph{p thủy nhiệt ở 185oC trong 5 giờ có đường kính từ 200 – 300 nm. Từ cacbon cầu n|y l|m template để tổng hợp vật liệu Co3O4 có hình thái cầu với đường kính từ 300 – 400 nm. Vật liệu Co3O4 tổng hợp được đặc trưng bằng XRD, SEM, UV-Vis, IR, BET. Vật liệu có tính cảm biến với khí độc H2S trong khoảng nhiệt độ ...

    pdf10 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 346 | Lượt tải: 0

  • Tổng hợp lưỡng oxit ZnO/CuO và ứng dụng làm xúc tác quang hóaTổng hợp lưỡng oxit ZnO/CuO và ứng dụng làm xúc tác quang hóa

    Trong nghiên cứu n|y, chúng tôi đề xuất phương ph{p mới để tổng hợp lưỡng oxit ZnO/CuO và ứng dụng để phân hủy xanh methylene (MB) dưới ánh sáng khả kiến. Lưỡng oxit ZnO/CuO được tổng hợp từ vật liệu khung cơ kim (Zn/Cu-BTC) bằng phương ph{p ph}n hủy nhiệt. Các vật liệu được đặc trưng bằng c{c phương pháp SEM (Scanning Electron Microscopy), XRD...

    pdf16 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 375 | Lượt tải: 0

  • Modeling and force analysis of an electrothermal micro gripper with amplification compliant mechanismModeling and force analysis of an electrothermal micro gripper with amplification compliant mechanism

    This work reports a novel design of a micro gripper, in which V-shaped electrothermal actuators are used to create gripping force and a compliant mechanism is integrated to amplify displacements of the actuators. The gripper is designed to handle micro samples of various sizes from 5 m to 50 m by applying appropriate driving voltages. Those vo...

    pdf6 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 307 | Lượt tải: 0

  • Removal efficiency of an aluminum based hydrotalcite-like-compound on ArsenicRemoval efficiency of an aluminum based hydrotalcite-like-compound on Arsenic

    Hydrotalcite has been considered as a promised adsorbent to remove arsenic. In this study, bench scale studies were conducted to evaluate the effects of adsorbent dose and initial pH on the efficiency for removing arsenic (As)(III) and As(V) by adsorption onto an Al-based hydrotalcite (named MA3). Then the maximum removal adsorption capacity and...

    pdf6 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 312 | Lượt tải: 0

  • Fabrication of sub-micro thin layer structures using cyclopentanone mix solution as a modified SU-8 3050Fabrication of sub-micro thin layer structures using cyclopentanone mix solution as a modified SU-8 3050

    The SU-8 3000 series have been formulated for improved adhesion to the substrate and reduced coating stress than SU-8 2000 series. It is being used to fabricate microstructures in the range of thickness from some up to several hundred micrometers. However, it is hard to fabricate the layer of the SU-8 3000 series at sub-micrometer thinness. In t...

    pdf5 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 336 | Lượt tải: 0

  • Influence of sintering additives on the porous structure and mechanical properties of porous aluminaInfluence of sintering additives on the porous structure and mechanical properties of porous alumina

    The aim of the present work is to investigate and to compare the influence of the two sintering additives Cr2O3 and TiO2 on the porous structure and the mechanical properties of the sintered porous alumina. Alumina based porous ceramics were fabricated by sacrificial template technique via powder metallurgy route from alumina powder using ammoni...

    pdf5 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 320 | Lượt tải: 0

  • Nghiên cứu ảnh hưởng của các thành phần đến tính chất của hạt nhựa compound chống cháy trên cơ sở polyetylenNghiên cứu ảnh hưởng của các thành phần đến tính chất của hạt nhựa compound chống cháy trên cơ sở polyetylen

    Trong bài báo này, ảnh hưởng của sự kết hợp các phụ gia chống cháy ATH/MPP (nhôm hydroxit/melamin polyphotphat) và các chất phụ gia khác như kẽm stearat (ZnSt) lên một số tính chất của hạt nhựa polyetylen (PE) compound chống cháy trên cơ sở hạt nhựa polyetylen tỷ trọng thấp (LDPE) đã được nghiên cứu. Tổng hàm lượng chất chống cháy được sử dụng l...

    pdf4 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 474 | Lượt tải: 0

  • Silver and gold nanoparticles: A toxicological AspectSilver and gold nanoparticles: A toxicological Aspect

    Silver and gold nanoparticles have been found in vast number of applications, especially in medicine. With increasing and intensively uses of these nanoparticles, there is a growing concern, recently, on their environmental impacts when they are released into environments. In this study, the size- and shapedependent cytotoxicity of silver and gol...

    pdf6 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 366 | Lượt tải: 0

  • Characterization of LiFePO₄ nanostructures synthesized by solvothermal methodCharacterization of LiFePO₄ nanostructures synthesized by solvothermal method

    In this work, we have synthesized LiFePO4 particles with the size around 200 nm by solvothermal method. The crystalline LiFePO4 was synthesized from LiOH.H2O, FeSO4.7H2O and H3PO4 precursors, using ethylene glycol and water as solvents. Ascorbic acid was added to the solution to prevent oxidation of Fe2+ to Fe3+. The structure was characterized ...

    pdf6 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 350 | Lượt tải: 0

  • Experimental studies to verify the effect of chip shrinkage coefficient on cutting forces and surface roughness in high speed milling of A6061 aluminum alloyExperimental studies to verify the effect of chip shrinkage coefficient on cutting forces and surface roughness in high speed milling of A6061 aluminum alloy

    This paper studied the relationship between the cutting force, surface roughness and chip shrinkage coefficient through the affect of cutting parameters, i.e., cutting speed, feed rate and uncut chip thickness. Experimental results of the chip shrinkage coefficient, cutting force and surface roughness at various cutting parameter values for high...

    pdf5 trang | Chia sẻ: thuyduongbt11 | Ngày: 16/06/2022 | Lượt xem: 301 | Lượt tải: 0